Turntables & Turntable Lifts

Turntables & Turntable Lifts

Flushmount Turntable Lifts

These lifts feature a built-in turntable that is essentially flush to the table platform in a clean, uncluttered design. The turntable bearings and support are under the platform and do not substantially increase the lowered height over that of comparable lifts without turntables. The turntable sits only 3/16" higher than the surrounding platform and is rotationally locked when the lift is in the full down position. Flush Mount turntable lifts are available in standard Southworth Backsaver Lift capacities to 4000 lbs. Turntables are available in 2 sizes; 20" and 43" diameter and are fitted into a limited number of platform sizes. The 43" diameter model can even be pit mounted when toe protection is added.

Conventional Turntables

Any Southworth Lift Table can be fitted with a turntable top to improve worker productivity and make accessing loads easier. Workers can manually spin the load so they are always working on the near side without having to walk around. Turntables include a rotating 1/2: thick platform with radiused corners, base plate, center shaft with bearing and inverted ball roller bearing assemblies. Capacities of up to 6000 pounds can be handled. In addition to being mounted on lift tables, Southworth turntables can also be mounted to the floor or on fixed height platform.

Powered Turntables

Southworth Powered Turntables are designed to the application and are available in a full range of capacities up to 6000 pounds and platform sizes up to 60" x 60". They included a 1/2" thick solid steel platform, oversized center pin and lubricated for life center pin bushing. Rotation speeds range from 1.5 RPM to 2.0 RPM. They feature a lowered height of only 9". Standard Voltage is 115/1/60.

Like our conventional (manual) turntable, powered turntables can be mounted to a lift table, fixed height platform or the floor.

PRODUCT SPOTLIGHT

  • Conventional, Flushmount or Powered Turntables
  • Conventional and Powered Turntables can be Mounted on Most Southworth Lifts
  • Flushmount Turntable Lifts Available in 2500 and 4000 Lb. Capacities
  • Turntables Made from 1/2" Steel Plate

Download our Ergonomics Picture Book

Have a question or comment?

Please let us know your name.
Please let us know your email address.
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Please let us know your message.

Invalid Input

  •  Flushmount Turntable Lifts

    Model
    Number
    Load
    Capacity
    Raised
    Height
    Low
    Height
    Platform
    Size
    Turntable
    Diameter
    Motor
    HP
    Voltage/
    Phase/HZ
    Shipping
    Weight
    Budget Range
    LS2.5-36-2436FMTT 2000 lbs 43.875" 7.625" 48" x 48" 43" 1 115/1/60 1200 lbs  
    LS4-36-4848FMTT 3500 lbs 43.875" 7.875" 48" x 48" 43" 1 115/1/60 1300 lbs $5600 - $6000

     Conventional Turntables

    Turntable PlatformBase PlateShipping Weight
    24" x 24" 24" x 24" 175 lbs
    24" x 36" 24" x 24" 200 lbs
    24" x 48" 24" x 24" 250 lbs
    36" x 36" 30" x 30" 300 lbs
    36" x 42" 30" x 30" 325 lbs
    36" x 48" 30" x 30" 350 lbs
    42" x 42" 30" x 30" 375 lbs
    42" x 48" 30" x 30" 425 lbs
    48" x 48" 30" x 30" 500 lbs
    48" x 56" 36" x 36" 550 lbs

    Powered Turntables

    ModelTurntable PlatformCapacityTurntable SpeedShipping Weight
    36-2000P 36" x 36" 2000 lbs 2.0 RPM 300 lbs
    36-4000P 36" x 36" 4000 lbs 2.0 RPM 300 lbs
    36-6000P 36" x 36" 6000 lbs 1.5 RPM 300 lbs
    48-2000P 48" x 48" 2000 lbs 2.0 RPM 600 lbs
    48-4000P 30" x 30" 4000 lbs 2.0 RPM 600 lbs
    48-4000P 30" x 30" 6000 lbs 1.5 RPM 600 lbs
    60-2000P 30" x 30" 2000 lbs 2.0RPM  800 lbs
    60-4000P 30" x 30" 4000 lbs 2.0 RPM 800 lbs
    60-6000P 30" x 30" 6000 lbs 1.5 RPM 800 lbs

Share this product

Visit Our YouTube Channel

youtube

Product Brochures

Full Line Thumb

Trade Shows

modexLogo

Productivity Audit

ergo audit guy3

Productivity and safety recommendations from a Southworth expert

Southworth Products Corp
P.O. Box 1380 
Portland, ME 04104-1380 
Toll-Free: 800-743-1000
TEL: 207-878-0700
FAX: 207-797-4734
Info@southworthproducts.com

logo contact